Alert is not triggered when rule is set to “Equals zero” for Remote Monitoring solution.

Repro steps:

1. Create a Remote Monitoring solution.




2. Create a alert rule for Engines Device group that is set when the fuel level is zero for 1 minute. Please see ruledetails.png.




3. Select engine-01.0 and run emptytank method




4. Check the fuellevel is set to zero to make sure emptytank method succeeded. Please see devicedetails.png




5. This alert is expected to trigger since fuellevel is set to zero but no alerts are triggered after 1 minute.

Along with selecting the subscription it would be nice to use an "already established" resource group. My enterprise admin only allows me to create resources in my own resource group (i.e. JonDoe-rg"). I would still like to select my own solution name but have the resources created in my resource group.

Pricing isn't clear at the start and so within just a few days, one can amass a really high bill without understanding. It would be nice to EASILY understand how to control the cost BEFORE starting. It would be really nice to be able to create a test account - I would be happy to pay for a sandbox, if it were easy. Today I just canceled my accelerator because we spent over $250 without understanding how to even use the accelerator. Very unhappy about that.

cannot configure solution accelerator

login.microsoftonline.com refused to connect.

I'm unable to sign in to my demo Connected Factory SA instance as it does not think I have the required Admin rights

Steps to reproduce:
1.Simulations
2.New simulation
3.Add the faulty connection string for your IoT Hub
4.Click "Start simulation"
5.Try to fix connection string
6."Start simulation" button will never activate

Only way to workaround is to create new simulation.

It's not possible to upload second javascript file, even basing on Microsoft tutorial: "Create an advanced device model". "Browse" button stops to work after uploading first file.

Is anybody testing this product ? There is a really many problems in most basic operations.

There may be quite a lot devices to manage, or in terms of the operation role, so , besides managing the devices by group, it's also necessary to manage the devices by login users.

Either the solution is broken or the documentation is wrong. Creating an advance device will only send the initial values as telemetry.

Either the solution is broken or the documentation is wrong. Creating an advance device will only send the initial values as telemetry.

need help!!

need help!!

login.microsoftonline.com refused to connect.

We used the accelerator to generate IOT data and then can view the data in TSI. However when we try to view the data view PowerBI , no 'raw' data can be viewed in PowerBI when using the TSI connector to PowerBI approach.

Here is a link to the details on how I am trying to view TSI data in PowerBI:

https://docs.microsoft.com/en-us/azure/time-series-insights/how-to-connect-power-bi

Where can I see what regions this solution is compatible with?

I am getting the error "login.microsoftonline.com refused to connect" when trying to connect to https://www.azureiotsolutions.com/Accelerators#sdssolutions/new/predictive-maintenance

I use Edge Dev and my personal MSC account to connect. Please see the attached pic.

Thanks.

It would be helpful if the factory, equipment can be configurable in the solution accelerator which can be used as mock up screens for demonstrating the azure IOT stack. This can be in the form of configuraiton of the factory to label the name of the industrial enterprise, equpments and the location on the world map. This will almost can be used as wire frames and PoC screen.

As per the documentation, admins can add a new OPC UA URI in the Browse tab. https://docs.microsoft.com/en-us/azure/iot-accelerators/iot-accelerators-connected-factory-customize#data-sources

However In my solution, I dont see that option. I have installed the Industrial IoT Gateway on my Iot Edge Server and is listed under the Connected factory Iot Hub edge servers with opctwin and opcpublisher modules in it.

I recently donated $200 to the Solution Accelerator development program and not terribly happy about it. The accelerator worked just fine but it would be so much more useful if you templated the deployment. If ARM templates were used for deployment, the solution would be easy to park and resume, thus pausing the Azure charges.