System Center Data Protection Manager

Welcome to System Center Data Protection Manager feedback forum! This is where we would like to hear your feedback and ideas on how we can improve our product.

How can we improve SCDPM?

(thinking…)

Enter your idea and we'll search to see if someone has already suggested it.

If a similar idea already exists, you can support and comment on it.

If it doesn't exist, you can post your idea so others can support it.

Enter your idea and we'll search to see if someone has already suggested it.

  • Hot ideas
  • Top ideas
  • New ideas
  • My feedback
  1. Please fix this problem in DPM 2019: The VHD containing the replica or one of its snapshots could not be mounted or unmounted

    Please fix this in DPM 2019: The VHD containing the replica or one of its snapshots could not be mounted or unmounted

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Flag idea as inappropriate…  ·  Admin →
  2. Fix console crashing on loss of connection to remote DPM server

    If you use the DPM Administrator Console to administer remote DPM servers, if the connection to the remote DPM server is interrupted for whatever reason (network connectivity drop out, service crash and restart, DPM host computer restarts, etc.), the connected remote DPM console will crash spectacularly, report the bug to Microsoft then eventually terminate.

    Please improve the console so it can be more resilient to communications failures between the console and the DPM computer. A loss of connection should not result in a catastrophic failure, rather, it should indicate a connection has been lost then offer to reconnect,

    This problem…

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Management  ·  Flag idea as inappropriate…  ·  Admin →
  3. Support 3rd party SMTP providers

    In MABS, you can setup an SMTP server for sending emails. The issue is that there is a requirement that the username you supply in the SMTP username field must be a domain user. I have no idea why this is required, but it makes using a 3rd party service such as SendGrid as your SMTP server much harder. In Sendgrid, I setup an API Key which then says I must supply the username as "apikey" and the password is the actual apikey.

    Obviously, the user "apikey" does not exist in the domain, so when MABS checks this, it fails.

    2 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  MABS  ·  Flag idea as inappropriate…  ·  Admin →
  4. DPM 2016 Backup Items in Azure Portal

    Right now DPM 1807 and 2019 will show a list of available Online Recovery points under Backup Items in the Recovery Services Valt in the Azure portal. For some reason DPM 2016 even with UR7 is excluded, even though you see the DPM server registered with the vault. Having visibility of what online recovery points DPM 2016 has created gives a simplified reporting mechanism for auditors, etc. when it is necessary to confirm that recovery points actually exist offsite.

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  SCDPM  ·  Flag idea as inappropriate…  ·  Admin →
  5. DPM 2019: Error 40002 – The VHD containing the replica or one of its snapshots could not be mounted or unmounted

    This error was fixed for DPM 2016 in Update Rollup 7. Please fix this for DPM 2019 now, and not make us wait for Update Rollup 1 (Q3 '19 on the roadmap). Neither host nor client has anything to do with VHD's and this error still occurs daily.

    12 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    6 comments  ·  SCDPM  ·  Flag idea as inappropriate…  ·  Admin →
  6. SCDpm use azure blob as "tape libray"

    Allow SCDPM (On-Premises) to azure blob storage for the long term jobs.

    For long time jobs using azure blob storage to store the data like a "tape library" can be more flexible than use a "real / virtual" tape libray

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  SCDPM  ·  Flag idea as inappropriate…  ·  Admin →
  7. Fix OneDrive Files On-Demand Bug

    For more than a year, several users have reported issues when Files On-Demand option is enabled for OneDrive even though the OneDrive folder is excluded from backups ( https://social.technet.microsoft.com/Forums/en-US/d612c19a-0f18-431a-9d75-9fb5dfd11aca/windows-10-1803-client-backups-failing-media-write-protected-errors?forum=dataprotectionmanager ).

    In our case, three scenarios are possible when the option is activated and the OneDrive folder is excluded:
    - on some computers, synchronization works properly
    - on other computers the synchronization fails randomly
    - on other computers, synchronization is impossible

    Two months ago, we opened a ticket, but Microsoft still has not released a patch.

    If Microsoft does not have enough human resources to update DPM, it should consider publishing…

    3 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Flag idea as inappropriate…  ·  Admin →
  8. Exclude disks for VM-level backups - VMWare

    Request the ability to exclude entire disks from a VM level backup. An example would be a VM level backup of a SQL server but we want to exclude the database dump volume since that contains redundant data.

    Another example is a file server that has multiple large historical drives (static data) and one active drive receiving new data. The fileserver could be protected at the VM level to target the active data but ignore the drives with static data.

    This entry is specific to VMWare VM protection.

    2 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  SCDPM  ·  Flag idea as inappropriate…  ·  Admin →
  9. Exclude disks for VM-level backups - Hyper-V

    Request the ability to exclude entire disks from a VM level backup. An example would be a VM level backup of a SQL server but we want to exclude the database dump volume since that contains redundant data.

    Another example is a file server that has multiple large historical drives (static data) and one active drive receiving new data. The fileserver could be protected at the VM level to target the active data but ignore the drives with static data.

    3 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Flag idea as inappropriate…  ·  Admin →
  10. SCDPM Progress indication on Consistency check, Replica creation and Backups

    SCDPM. At the moment there is no indication of how far a backup is. A simple percentage number would be nice. Maybe separate for preparing backup and transferring, but that is optional.
    Especially on Consistency checks it is very much needed with a progress indication. We have no idea if it is done with 10% or 99%. That should not be so difficult as we check 100% of data.

    3 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  SCDPM  ·  Flag idea as inappropriate…  ·  Admin →
  11. Backup directly to blob

    Allow for DPM to backup directly to blob storage in Azure without the need for local disk (or very little local disk/staging)

    2 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  SCDPM  ·  Flag idea as inappropriate…  ·  Admin →
  12. BUG: missing registry key

    Hi,

    I've recently had to rebuild our primary DPM server and chose to go to 1801 > 1807 to future proof a bit! Once the production was up and running I thought it was worth backing that up to another DPM server, so I created one in Hyper-V & got to the installation phase when I had the dreaded "I couldn't find the Hyper-V tools installed" error. However, this one was different - it was looking for a registry key at HKLM\Software\Microsoft\Microsoft Data Protection Manager\Setup\HyperVPowerShell. Just out of curiosity I manually created this path in the registry & the installer…

    2 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  SCDPM  ·  Flag idea as inappropriate…  ·  Admin →
  13. Fix ReFS or allow pre-MBS storage option in DPM 2016

    Fix ReFS or allow pre-MBS storage option in DPM 2016
    MBS is clearly broken, for a long time and since a fix is not eminent, please allow us to return to DPM 2012 R2 style of storage.

    22 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    9 comments  ·  Flag idea as inappropriate…  ·  Admin →
  14. Add DPM agent to backup/restore linux hosts with DPM.

    We would like to be able to backup/restore linux hosts with DPM, through an agent.

    4 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  SCDPM  ·  Flag idea as inappropriate…  ·  Admin →
  15. File-level restore from Linux VM on VMware / Hyper-V.

    Add capability to restore files from backup of a linux virtual machine on VMware and Hyper-V.

    4 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  SCDPM  ·  Flag idea as inappropriate…  ·  Admin →
  16. Allow the SQL db auto-protect schedule to be modified

    Currently, SQL auto-protect jobs run at midnight and will cause tape backup jobs to fail if they are running at midnight with the error:

    The job was cancelled because the user modified the associated protection group. (ID 33342)

    This is per https://social.technet.microsoft.com/Forums/en-US/a1f0dd1d-e445-4613-a5e7-e97ab3013428/tape-backup-jobs-failing?forum=dpmtapebackuprecovery&prof=required

    Please allow us to change the schedule the db auto-protect routine runs. It is extremely difficult to try to time the SQL backups to not run across midnight if you have a lot of backup jobs running to tape.

    2 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  SCDPM  ·  Flag idea as inappropriate…  ·  Admin →
  17. Deploy DPM agents with Smartcard required account

    Currently, if we want to deploy DPM agents we have to remove Smartcard from our administrative account. We should be able to deploy the agent without being required to provide a username and password.

    2 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  SCDPM  ·  Flag idea as inappropriate…  ·  Admin →
  18. Fix custom tape label bug

    In DPM, when customising tape backups, you used to be able to set the label for the tape. This was great. Since 1807, this functionality is completely broken. Custom tape labels that existed prior to upgrading retain their custom tape label but you cannot change or set new tape labels for protection groups.

    Please fix this bug.

    3 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  SCDPM  ·  Flag idea as inappropriate…  ·  Admin →
  19. BUG: The datasource property 'ShadowCopyAreaSize' is always 0 in DPM 2016

    I believe this is a minor bug in all versions of DPM 2016 - I've managed to check on UR2, UR4, UR5, UR6, and they all display the same problem. It is easily reproducible as it occurs on the multiple sites I've tried it on.

    In all versions of DPM, you can return the various data sizes using this simplified script which will query the first datasource in the first protection group only:

    $DPMServer = 'MyDPMServer'
    $ProtectionGroup = Get-ProtectionGroup $DPMServer | Select-Object -First 1
    $DataSource = Get-Datasource $ProtectionGroup |Select-Object -First 1
    $DataSource.ReplicaSize / 1gb
    $DataSource.ReplicaUsedSpace / 1gb
    $DataSource.ShadowCopyAreaSize / 1gb …

    5 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  SCDPM  ·  Flag idea as inappropriate…  ·  Admin →
  20. 2 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  Azure Files  ·  Flag idea as inappropriate…  ·  Admin →
← Previous 1 3 4 5 6
  • Don't see your idea?

System Center Data Protection Manager

Feedback and Knowledge Base