Azure Monitor
Azure Monitor Action Groups enable you to configure how to receive notifications when an Azure Monitor Alert is triggered.
-
Add support for Oracle Enterprise Linux to Dependency Agent
Currently the following message is provided during installation of dependency agent on OEL 7.7
Dependency Agent 9.10.0.7820 Setup for Linux
Checking installation environment...
Oracle Unbreakable Enterprise Kernel (4.14.35-1902.6.6.el7uek.x86_64) is not supported.
The Dependency Agent was not installed.
6 votesThanks for your feedback and its now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Microsoft-Windows Diagnostic-Performance
We want to monitor the health of our workstations using Azure Monitor. One of the most important metric to start with is the boot time that resides in the event log. Currently Azure Monitor does not collect the event log named "Microsoft-Windows Diagnostic-Performance".
Can you please add this event log in Azure Monitor?
6 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Azure Monitor - add Git integration for workbooks in Azure Portal
There is currently no option to save notebook source markup to a Git repo From Azure Portal. The ask is to integrate GitHub in Azure Portal so workbooks can be automatically saved to Git repo and have better integration.
5 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Sort the list of templates in an action group in combination with the ITSM Connector
When you add an ITSM Connector action to an action group you have to select a template for an incident workitem. This list of templates is not sorted and there is also not an option to filter. With sometimes hundreds of templates this is an absolute nightmare. Start by sorting the list of templates. Adding an option to filter as well would be a great addition.
5 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Ability to show Azure Databricks cluster metrics using Azure Monitor on Azure Dashboard
Azure Monitor does not show Databricks cluster metrics in Azure Dashboard. Add the ability to show Databricks metrics in Azure Monitor dashboard.
5 votesThanks for your feedback and its now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Azure Monitor HTTP Data Collector API to support Managed Identities authentication method
Azure Monitor HTTP Data Collector API to support Managed Identities authentication method.
5 votesThanks for your feedback and its now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Full transparency when VMs are throttled
Please allow us to learn when Azure decides to throttle disk/CPU resources. You already have the data. I'm just asking that you share it with the customer so we can build alerts based on that data. Your suggested solution of asking each user to run performance-monitoring services within the client to monitor disk throughput/CPU usage is straight from the Department of Redundancy Department.
5 votesThanks for your feedback and its now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Azure Monitor dashboards created from Analytics queries are not auto-refreshed
Created visualizations using Application Insights/Log Analytics (KQL), and has pinned them to the dashboard in Azure portal. The dashboard however does not provide any mechanism to set auto-refresh interval and hence customer has to manually click the refresh icons each time on each visualization.
5 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Heartbeat Metrics Alert to pass Computer Resource ID
Currently there is no heartbeat metrics alert available for VM to pass resource ID. Most of the customers are being looked for this solution to implement in Heartbeat Metrics alert.
If Microsoft enable this option that would help to customer to get Resource ID in the Heartbeat metrics Alert.
please take this request as Priority as per customer Feedback and do the needful at the earliest..
5 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Rework the standard support e-mail
The standard e-mail is not very good.
I have 6 different subscriptions to monitor. There is no way of knowing which subscription has triggered the alert, unless i memerize the GUID for the subscription.
Rule ID: Same thing. Use the name of the sub instead.
The link in the e-mail points to "the portal". Just the default page. Is there no way to point the user to at least some other page, nearer the actual error?
5 votes -
On app service performance counters for TCP connections, don't filter by TCP state, instead show a line per type
Under "Diagnose and solve problems" > "Metrics per instance (Apps)" > "Perf Counters" > "TCPv4\ TCPv4 Connections Established"
It describes the graph as...
Connections Established is the number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT.Can you instead show a line per state so we can understand if there are connection issues. And don't filter on just the above 2, show all.
Also, the description has "CLOSE-WAIT" as what it is showing, but the state in TCP is actually "CLOSEWAIT", is there a possible bug with the filter and it is actually not…
5 votes -
Provide More Details for Azure Portal Notification
We received an amber alert in the Azure Portal Notifications which read
'Requests throttled Requests to the server are being throttled'.
When you clicked for more information there was none available. Please can you make it so that more information is available so we can have visibility to where the issue is coming from.
4 votes -
Add a Service endpoint on VNet/Subnet to "AzureMonitor" services.
Add a new Service Endpoint to Service Tag "AzureMonitor" IP's. This will be helpful to monitor various resource performances on Azure and the traffic always stays in MS Datacenter.
4 votes -
Set the axis tick marks in Azure Monitor
Currently, the axis tick marks in Azure Monitor are calculated automatically based on the data.
There are situations where I would like to see a more detailed the axis tick.
So I'd like to see a feature developed to set the axis scale in Azure Monitor!4 votes -
Azure Action Group cannot be easily renamed
There is no way to rename Azure Action Groups after they are created. Only way is to delete and recreate the Action Group with the desired name. This is an inconvenience for the user, having the ability to edit and rename the Action group name would be very useful.
4 votesThanks for your feedback and its now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Allow Action Groups to be assigned to alerts across subscriptions
-A single team defines action groups, with custom payloads and webhook endpoints
-Deploys them to their resource group
-Assigns the tenant read access to the resource
-Other teams can then create alerts and utilize that single source to pick action groups4 votesThanks for your feedback and its now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
create a Monitor alert mechanism for Mangement group or subscription
Please create a Azure monitor alert for management group so that we don't have to go for each subscriptions etc to apply all alerts, and for example if we do have a new subscription etc we do not have any mechanism to get create alert for new subscription or deletion or rename or disabled etc. Currently we have to manually managing any subscription addition on portal.
This is badly needed for new users as they are getting in they will register lot of subscriptions and resources.4 votes -
Azure Dashboards. Enable auto refresh for Azure Monitor (metrics an logs) tiles
Currently only Application Insights tiles are enabled to automatically refresh.
4 votesThanks for the feedback. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Email customization required to trigger the alert without seach query
Hi Team,
We need to do the Alert Email Template customization where need not send the 'Search Query while trigger the every alert mail .
Regards,
Suresh4 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Integrate Azure Active Directory for Action Groups
Enable AAD integration with Action Group recipients, where an email address is required.
4 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
- Don't see your idea?