Azure Monitor
Azure Monitor Action Groups enable you to configure how to receive notifications when an Azure Monitor Alert is triggered.
-
setup individual disk drive low free space alert on subscription level
The existing Metrics function only can trigger alert when overall disk drive space is low, but cannot monitoring and trigger alert when disk space running out when occurred in single drive space.
Classic alert can do the individual drive monitoring but needed to re-config & setup it "per drive" on each machine repeatedly & hard to manage, it cannot do that by subscription or resource group level for bulk management.
So would like to have this missing function "drive level free space monitoring" on Metrics.
74 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Configure Network Performance Monitor with Powershell / API
I have a large number of services I would like to monitor with NPM, and using the web GUI will be very tedious to enter (and manage) them all.
37 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Enable logging of all service bus metrics from diagnostic logging
We recently enabled diagnostic logging in Azure Service Bus. While there are over a dozen metrics that are collected (https://docs.microsoft.com/en-us/azure/azure-monitor/platform/metrics-supported#microsoftservicebusnamespaces), only a few (IncomingRequests, IncomingMessages, OutgoingMessages) are exported when streaming to either a storage account or event hub. Per MS Premier Support, the other metrics are currently not supported.
Add support for streaming of all metrics from Azure Service Bus. This will make logging and monitoring of service buses much more effective.
36 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Azure Alerts - More Parameters for Webhook JSON Payload
In log alerts, there's a fixed list of parameters defined for Webhook JSON payload.
https://docs.microsoft.com/en-us/azure/azure-monitor/platform/alerts-log-webhook#sample-payloads
Can Azure add more parameters to it from search results?
For example: Caller (user who triggered the alert), App/Resource name (for which the alert was triggered), etc.23 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Custom logs via azure cli
Custom logs can be set up through the portal GUI or some roundabout methods building custom APIs. It would be great to be able to do this through the azure cli so it can be scripted/automated.
19 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Changing Language of notification
Customer is Japanese people. So, they want to see the mail notification as Japanese.
But now, we can not see Japanese in notification and can not change the language.
I want to get feature about changing language for notification.17 votesThanks for the feedback. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Adaptive application control - automatically include Azure Monitoring exe's
Adaptive application control seems like a good way of "auditing" unwanted programs from running on your VM.
Can you add a feature to be able to exclude the Azure Monitoring (health and diagnostic checks) and even VSTS-agents ?
Adding each individual path to the "policy extension" list is not efficient.15 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Add an option for a demo of service health alert
Currently, there is no demo option for service health alerts, and an user can receive alerts only when an actual incident occurs. However, some customers would like to check if the alert works properly before configuring it in a production environment. Therefore, it would be great if the user could fire a service helth alert as a test.
12 votesThanks for your feedback and its now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Can we please have the database size shown on azure dashboard?
Can the database sizes be displayed on the DTU percentage graphs on Azure dashboards, as it will be very helpful to our monitoring? like the attached picture. Thanks.
10 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Direct integration with Slack apps
The suggested integration with Slack is requires an 'API connection' in Azure.
Slack's recommended way of integrating is via an application which exposes a web hook URL.
https://api.slack.com/start/overview
Azure DevOps already supports integration directly with such an app (we already have this working). The suggested use of a Logic App requires an additional resource definition in Azure. I'd much prefer to manage my apps in Slack and then just add a web hook as a secret to a key vault.
Rather than having to define a logic app to define the mapping between Azure common schema and Slacks schema there…
10 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Make it possible to modify automatically generated VM Insights alerts.
The new VM Insights experience is great, and fills a void in VM monitoring. Now we can finally get an overview of full disk etc.
We would like to modify or add the alertrule for these alerts to get notified on Teams/Webhook/mail etc.
9 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Azure Quotas API/cmdlet
Monitor the limit and current use of Azure services using API or cmdlet (currently only available for compute, storage and networking resources using Get-AzVMUsage, Get-AZStorageUsage and Get-AzNetworkUsage) in order to generate alerts before reaching the limit of use / quota
8 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
8 votes
Thanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Add support for Oracle Enterprise Linux to Dependency Agent
Currently the following message is provided during installation of dependency agent on OEL 7.7
Dependency Agent 9.10.0.7820 Setup for Linux
Checking installation environment...
Oracle Unbreakable Enterprise Kernel (4.14.35-1902.6.6.el7uek.x86_64) is not supported.
The Dependency Agent was not installed.
6 votesThanks for your feedback and its now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Microsoft-Windows Diagnostic-Performance
We want to monitor the health of our workstations using Azure Monitor. One of the most important metric to start with is the boot time that resides in the event log. Currently Azure Monitor does not collect the event log named "Microsoft-Windows Diagnostic-Performance".
Can you please add this event log in Azure Monitor?
6 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Azure Monitor - add Git integration for workbooks in Azure Portal
There is currently no option to save notebook source markup to a Git repo From Azure Portal. The ask is to integrate GitHub in Azure Portal so workbooks can be automatically saved to Git repo and have better integration.
5 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Sort the list of templates in an action group in combination with the ITSM Connector
When you add an ITSM Connector action to an action group you have to select a template for an incident workitem. This list of templates is not sorted and there is also not an option to filter. With sometimes hundreds of templates this is an absolute nightmare. Start by sorting the list of templates. Adding an option to filter as well would be a great addition.
5 votesThanks for the valid suggestion. Your feedback is now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Ability to show Azure Databricks cluster metrics using Azure Monitor on Azure Dashboard
Azure Monitor does not show Databricks cluster metrics in Azure Dashboard. Add the ability to show Databricks metrics in Azure Monitor dashboard.
5 votesThanks for your feedback and its now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Azure Monitor HTTP Data Collector API to support Managed Identities authentication method
Azure Monitor HTTP Data Collector API to support Managed Identities authentication method.
5 votesThanks for your feedback and its now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
-
Full transparency when VMs are throttled
Please allow us to learn when Azure decides to throttle disk/CPU resources. You already have the data. I'm just asking that you share it with the customer so we can build alerts based on that data. Your suggested solution of asking each user to run performance-monitoring services within the client to monitor disk throughput/CPU usage is straight from the Department of Redundancy Department.
5 votesThanks for your feedback and its now open for the user community to upvote & comment on. This allows us to effectively prioritize your request against our existing feature backlog and also gives us insight into the potential impact of implementing the suggested feature.
- Don't see your idea?