Azure Stack Hub
Do you have an idea, suggestion or feedback back for the Azure Stack Hub team? We would love to hear it!
Please take a few minutes to submit your feedback in the Azure Stack Hub forum or vote up an idea submitted by another Azure Stack Hub customer. All of the feedback that you share in these forums will be monitored and reviewed by the Azure Stack Hub team.
Please remember that this is a Feedback forum, and should be used for ideas and suggestions related to Azure Stack Hub.
We look forward to hearing from you.
The Azure Stack Hub Team.
-
VNET Peering in Azure Stack
Please consider to implement VNET Peering on Azure Stack (like available on Azure) to be able to connect VNETs within the Azure Stack Region without the need to provision VPN-Gateways
416 votesThis feature is under review.
Thanks
-
Metering for Internet usage for tenants
Provide the metering for the network usage for internet traffic ingress & egress for a tenant.
This is essential for Service Providers in order to bill and recover internet usage costs
111 votesThis feature is under review.
Thanks
-
ASDK: Extended network connectivity
I like the default ASDK setup that do not need extended network knowledge to get it up and running. That should stay as it is.
At the other hand, more advanced network setups where connectivity outside the ASDK environment can be needed. Some use cases:
In our case we are running a Azure Stack proof-of-concept that includes connectivity to other systems and the internet
Development use case were you are developing / testing your application and the application need existing test systems that are outside the ASDF environment. Think of: enterprise message busses, datawarehouses / databases, integration with cloud services,…
70 votesThanks for your feedback.
This is currently under review.
-
Possibility to make more than one connection to an external VPN endpoint
At the moment it is not possible to create multiple connections to an external VPN endpoint from the Azure Stack VPN-gateway for all tenants on the stamp. We would like to see this fixed/improved.
50 votes -
Higher VPN bandwidth
VPN bandwidth seems to be at most 200Mbit/s. Achieving higher bandwidth over a VPN connection should be possible.
43 votesThank you for your feedback, this is currently under review
-
Application Security Groups
We would like this on Azure Stack too please!
https://azure.microsoft.com/en-gb/blog/applicationsecuritygroups/37 votes -
Azure Stack DNS needs DNSSEC support
DNSSEC is required to be able to secure your DNS requests. At the moment this is not available. Our client requesting us more and more security compliancy : https://www.icann.org/news/announcement-2019-02-22-en
30 votes -
Support for IPv6 public facing IPs, both static and dynamic on Azure Stack
Azure provides support for IPv6 public facing IPs, both static and dynamic.
Havign equivalent features (IPv6) public facing IPs on Azure Stack (and without changing IPV4 on SDN) will allow us facilities vs ipv4-exhaustion on RIPE and Stack to make evolution on DC to support IPv6 on Regional Access Gateway, Router, Firewall around Stack to make it work.
28 votes -
Azure Stack Admin REST API - Add Tags within Public IP Addresses endpoint
We would like to make some automation on Azure Stack and PIP @ip address within Datacenter integration by using TAGS.
The REST API : https://docs.microsoft.com/en-ca/rest/api/azurestack/publicipaddresses/list?view=servicefabricactors-2.6.204 have tags properties available, but when we call the REST API Endpoint, the JSON response not reporting value setup within Stack :(
In term of usage, here 2 use cases.
use case 1 : if Public IP scenario is used for PIP and deployement, then by "default" the Public IP could be protected by Physical Firewall in front of Stack (ie Policy with low priority with Deny/Deny by default). Then, if the end user want…
26 votes -
Add ability to report Public IP usage for Tenants for Billing Purposes
As a CSP we need to be able to report how many Public IPs our tenants are using.
We also need to be able to report which exact IPs are being allocated to specific tenants.
Currently we can only do it inside the Stack but it does not say which resource is using which IP.
None of the data from inside Azure Stack gets reported back via CSP Billing Portal.
Therefore, we not only cannot see who is using which IPs, but also are unable to bill for them.
https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-viewing-public-ip-address-consumption
23 votes -
Add PTR support for DNS resolution of the external facing infrastructure services in Azure Stack
Some customers may need to define firewall rules based on URLs rather than IP addresses. For this to work for the incoming traffic, PTR resolution must be available for the IP range used by the external facing infrastructure services of Azure Stack.
21 votesHello,
Thank you for Feedback, this is currently under review.
thanks
Shireen -
Vtap support for Azure Stack
Hi Team, i would like to request for Vtap option on Azure Stack inline with the feature on Azure Cloud. This helps to extract critical telemetry based on network traffic.
9 votes -
The possibility to assign an public ip adres from an different IP pool.
It is possible to add an new public IP pool, only it is not possible to assign an IP address from that new IP pool to a new customer by using an offer and network quote. Or by creating an VM with an Public IP address and have the possibility to chose an IP address from that new pool.
9 votes -
Allow any string in DNS Record Sets
Creating a A Record in the form of "foo.master.my.domain.com" results in an error on Azure Stack.
It seems the problem is the ".master." part, "foo.masterli.my.domain.com" works great.
This problem occures when creating a DNS record set via the Azure Stack Hub Portal within a DNS Zone Object, the Errormessage is "Error: error".
When using the Azure Stack API (using the Azure API docs located here: https://docs.microsoft.com/en-us/rest/api/dns/recordsets/createorupdate) via python, the response is a HTTP 404:
msrestazure.azure_exceptions.CloudError: 404 Client Error: Not Found for url: https://management.stack.my.domain.com/subscriptions/0xdeadbeef-subscription-id/resourceGroups/myResourceGroup/providers/Microsoft.Network/dnsZones/mydnszone.stack.my.domain.com/A/foo.master?api-version=2016-04-01
The old API version seen in the request was the only one that worked.
It should…
8 votes -
IPv6 address support in virtual networks
IPv6 address support in virtual networks.
8 votes -
Please provide a way to quickly gather the MAC address of any VM, PIP, etc within the admin & tenant portals.
Some companies require tracking MAC addresses inside an IPAM system, having a quick way to obtain these would be helpful. I thought there was a way to do so prior to 1903 update? I can do so via PowerShell but its time consuming.
7 votes -
Ability to connect Linux VM to Azure Stack through Azure stack VPN
Ability to connect Linux VM to Azure Stack through Azure stack VPN.
For Example am able to connect windows VM through VPN, But not Linux.
Kindly provide these support
6 votes -
Azure Stack Meter for VPN SKU
For Multi-Tenant use uf Azure Stacks we use the meters to calculate and invoice end customers. Unfortunately there is no VPN SKU meter. So we don't know which customer is using which (or any) VPN SKU on Azure Stack. We need to have that meter to invoice correctly.
4 votes -
Virtual Network Service Endpoints on Azure Stack
Get Virtual Network (VNet) service endpoints on Azure Stack to allow us to extend virtual network private address space and the identity of our VNet to the Azure Stack services (PaaS such App Service, SQL (PaaS), Mysql (PaaS), Kubenetes, Event Hub,, over a direct connection.
3 votes -
Retrieve the value of the fields associated to work item in Azure devOps using Rest API
We are trying to Migrate the Entity(EPIC, feature, user story & Bug) from another tools(TP,QC,JIRA) to Azure devOps using Azure devops Rest API(/_apis/wit/fields?api-version=4.1) as well Client.
But Rest API returning fields details but not field value and it will be good if Rest API will return field value as well because we can map field as well as value to another tool while migration.
3 votes
- Don't see your idea?