Virtual Machines

  • Hot ideas
  • Top ideas
  • New ideas
  • My feedback
  1. 4 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →
  2. Allow Termination Events to be enabled on VMSS with Low-Priority/Spot

    Would like the ability to enable Termination events on Low-Priority/Spot VMSS.

    Low-Priority/Spot VMs currently have the ability to react to pre-emption events, but lack the ability to handle scale-in events like the regular priority, auto-scaling, Scale Sets do.

    I'm acknowledging that this appears to be an intentional decision (see examples below), but think that this would be useful.

    Terminate Notification:
    https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/virtual-machine-scale-sets-terminate-notification#tips-and-best-practices

    As well as the api response when attempting to enable it via PoSH:

    "Virtual Machine Scale Sets with extension scheduledEventsProfile must have property priority set to Regular"

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →
  3. Add ephemeral OS disk support for Spot instance Virtual Machine Scale Sets (vmss)

    In the past you could create low priority vm scale sets with an ephemeral os disk. This feature was dropped when spot instances were introduced. Please add ephemeral os disk support for spot instance vm scale sets.

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →
  4. Please vote for Termination profile

    https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/virtual-machine-scale-sets-terminate-notification

    This helps to invoke custom clean up commands and make sure the VMSS Scale in has sufficient time to clean up and then gets terminated

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →
  5. Get public IPs from metadata for VM Scale Sets instances

    Case with the Support shows a limitation in the metadata for VMSS instances.

    Indeed, it is actually not possible to get the Public IP of a publicly addressed VM Scale Set instance from the metadata.

    I hope this limitation will be shortly fixed.

    3 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →
  6. 1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →
  7. Effective route tables for VMSS

    As confirmed by PG in Support case 119091125000146 there is no way to query the effective route table for a VMSS instance, thus leaving 100% VMSS based infrastructures completely blind.

    9 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    2 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →

    Thanks for the valid suggestion. Your feedback is now open for the user community to upvote which allows us to effectively prioritize your request against our existing feature list and also gives us insight into the potential impact of implementing the suggested feature

  8. Ability to read properties values in Microsoft.Compute/virtualMachineScaleSets/extensions/settings policy alias

    Would like to be able to create azure policy that can check the value of properties in VM & VMSS extensions. For instance if I have deployed the AzureDiskEncryptionForLinux extension i would like to further validate that the available settings for that extension are configured per company policy. so ability to add something like the following in a policy rule:

    "field": "Microsoft.Compute/virtualMachineScaleSets/extensions/settings"
    "containsKeyValue": "EncryptionOperation:EnableEncryption"

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →

    Thanks for the valid suggestion. Your feedback is now open for the user community to upvote which allows us to effectively prioritize your request against our existing feature list and also gives us insight into the potential impact of implementing the suggested feature

  9. Request new feature : Converting existing unmanaged VMSS to managed VMSS.

    the scenario is
    1. we has an existing VMSS with unmanaged os disk already
    2. we want to convert to managed os disk in this VMSS.

    currently, it supports signle VM to migrate from unmanaged os disk to managed os disk, but it does not be supported for VMSS scenario.

    the current solution is we have to buildout a new VMSS with managed os disk and move our service from old VMSS to new VMSS, this has high risky(for exmaple, move the data from old VMSS to new VMSS, etc.),

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →

    Thanks for the valid suggestion. Your feedback is now open for the user community to upvote which allows us to effectively prioritize your request against our existing feature list and also gives us insight into the potential impact of implementing the suggested feature

  10. add which availability zone a scale-set instance is in to the overview panel

    on the VMSS-.>instances->instance page, please expose which AZ the instance is running in.

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →

    Thanks for the valid suggestion. Your feedback is now open for the user community to upvote which allows us to effectively prioritize your request against our existing feature list and also gives us insight into the potential impact of implementing the suggested feature

  11. feature request for an extension to run during VMSS scale in operation

    feature request for an extension to run during VMSS scale in operation

    2 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →
  12. VMSS rolling updates on custom images

    Allow rolling updates on custom images.

    Currently if you build a custom image and create a VMSS with it you have to manually "roll it out" via upgrade. Seems silly when the image is housed and built just like any other. were just talking about watching the upgrade process by way of the VM's "upgrade status"

    seems doable not sure why its held back, especially when the VMSS set knows its "not current"

    4 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →

    Thanks for the valid suggestion. Your feedback is now open for the user community to upvote which allows us to effectively prioritize your request against our existing feature list and also gives us insight into the potential impact of implementing the suggested feature

  13. Support put metrics from multiple nodes from a VMSS into a single chart in metric explorer

    Currently, from metric explorer I can view some metrics from a single node from a VMSS. For example, I can view CPU percentage for node-0 in a chart. However, it will be more useful if I can put CPU percentage metrics for other nodes in the same chart so that I can view all CPU usage in a single chart. Then I can do a second chart for network for all nodes.

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →

    Thanks for the valid suggestion. Your feedback is now open for the user community to upvote which allows us to effectively prioritize your request against our existing feature list and also gives us insight into the potential impact of implementing the suggested feature

  14. Allow VM console access when storage account has firewall enabled

    It's pretty ridiculous that the Azure VM serial console won't work when the boot diagnostics storage account has a firewall enabled.

    First, it should be possible to use a firewall for additional protection of boot diagnostics. I understand that the storage has to be written from the host server, not the VM, so it might not be on the correct vnet; but this should be considered a "trusted Azure service", or there should be another option to allow it.

    Second, the Serial Console is not the same as boot logging. They are two separate things! I should be able to…

    3 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    1 comment  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →

    Thanks for the valid suggestion. Your feedback is now open for the user community to upvote which allows us to effectively prioritize your request against our existing feature list and also gives us insight into the potential impact of implementing the suggested feature

  15. Allow update of gallery image for VMSS

    When referencing a custom image in a VMSS from a Shared Image Gallery (Preview), it cannot be updated to refer to a new image. This results in an error code "PropertyChangeNotAllowed".

    Today, a VMSS can be updated to a new image reference when it references a managed image that does not reside in a Shared Image Gallery.

    7 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    1 comment  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →
  16. N-Series VMs with AMD CPUs

    Please offer N-Series units with AMD Epyc CPUs.

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →
  17. where do i put a password for the oracle vm?

    in the step Automate database startup and shutdown needs a password? the password is: OraPasswd1 ? it does not work!

    https://docs.microsoft.com/en-us/azure/virtual-machines/workloads/oracle/oracle-database-quick-create?view=sql-server-2016

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →
  18. Enable Powershell Cmdlet for migrating VMSS to use Managed Disk

    Similar to the cmdlet ConvertTo-AzVMManagedDisk - have an option to trigger a VMSS migration to use Managed Disk

    3 votes
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →
  19. Azure Virtual Machine Scale Set

    The ability to select and register the Azure Virtual Machine Scale Set to Azure Automation DSC. Currently you are only able to select Virtual Machines. This becomes a problem when you need to refresh the key after a year has expired.

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →
  20. it does not allow size in a virtual machine

    I have created a virtual machine with a free 30 day trial of Azure (with credit 161.90), following the instructions of Microsoft but at the time of selecting the size in select size

    It shows me the following image ...

    https://docs.microsoft.com/en-us/azure/virtual-machines/windows/quick-create-portal?WT.mcid=UIempg

    I do not understand why the size of the vm can not be created.

    1 vote
    Sign in
    (thinking…)
    Sign in with: Microsoft
    Signed in as (Sign out)

    We’ll send you updates on this idea

    0 comments  ·  VMSS  ·  Flag idea as inappropriate…  ·  Admin →
← Previous 1
  • Don't see your idea?

Virtual Machines

Categories

Feedback and Knowledge Base